Specifications
– Input: 220-240V 50HZ
– Power Input: 10W
– Output Voltage: DC 3-12V
Instruction
- Before connected to the power, please make sure the input voltage is the same with the voltage required on the backside of the power box.
- Socket should be well earth connected.
- Connect portable polisher to output socket power box, then connect push to the socket of foot push on the backside of power box.
- Adjust the speed to the minimum.
- Switch on, with the indicating lamp on and the polisher head turns slowly.
- Adjust the speed controller to increase the speed.
- Switch to “FOOT” if you choose to use the foot push, the speed will be increased as you increase foot pushing force.
- If the indicating lamp isn’t on during working, please check the fuse and change it if it’s broken.
- Make sure the power is off if the polisher not used for a long period.
